Mercedes-Benz E 320 1994 Owner'S Manual Download

Page: 72 / 141

Drinking and Driving

Warning!

Drinking and driving can be a

very dangerous combination.

Even a small amount of alco
hol or drugs can affect your

reflexes, perceptions and

judgement.

The possibility of a serious or

even fatal accident is sharply

increased when you drink and

drive.

Please don’t drink and drive or

allow anyone to drive after

drinking.

Driving Off

Test the brakes briefly after driv

ing off. Perform this procedure

only when the road is clear of

other traffic.

Warm up the engine smoothly. Do

not  place  full  load  on  the  engine
until  the  operating  temperature
has  been  reached.

When  starting  off  on  a  slippery
surface,  do  not  allow  one  driving
wheel  to  spin  for  an  extended

period.

Parking Brake

To engage, depress parking brake

pedal.  When  the  key  is  in  steering
lock  position  2,  the  brake  warning
lamp  in  the  instrument  cluster
should  come  on  brightly.

To release the parking brake, pull

handle  on  instrument  panel.  The
brake  warning  lamp  in  the  instru
ment  cluster  should  dim.

Also see

Brake Warning Lamp

Test

in Index.

Warning!

Keep driver’s foot area clear at

all times. Objects stored in this

area may impair pedal

movement.

Summary of Contents for E 320 1994














































































































































Search results

Summary of Contents for E 320 1994

Reviews:

Related manuals for E 320 1994

Brands by name

Popular brands

Mercedes-Benz E 320 1994, Owner'S Manual

Search results

Summary of Contents for E 320 1994

Reviews:

Related manuals for E 320 1994

Brands by name

Popular brands