Mercedes-Benz COMAND MY08 Operator'S Manual Download

Page: 83 / 186

Satellite radio*

Satellite radio operation

Tuning using the multifunction steering
wheel

Switch the multifunction display in the
instrument cluster to Satellite radio
display (

page 27).

Press

The search proceeds in ascending or-
der;

Press

The search proceeds in descending or-
der.

The search stops at the first receivable
station.

Tuning via scan search

Scan search is characterized as follows:

Scan search plays a channel for

approx. 8 seconds and then skips to
the next channel within the current

category.

Scan search can be ended manually.

Scan search stops automatically at the
station that was playing when scan
search was started.

Press the

Scan

soft key.

The scan search starts.

Press the

Scan

soft key again.

The scan search stops.

Additional text information (artist and
track title) related to the current broadcast
can be displayed.

Press the

Info

soft key.

Using

is followed by a short

delay before the change occurs. Using

and

changes the channel

immediately.

Obtaining additional text

information

Summary of Contents for COMAND MY08



























































































































































































Search results

Summary of Contents for COMAND MY08

Reviews:

Related manuals for COMAND MY08

Brands by name

Popular brands

Mercedes-Benz COMAND MY08, Operator'S Manual

Search results

Summary of Contents for COMAND MY08

Reviews:

Related manuals for COMAND MY08

Brands by name

Popular brands