Mercedes-Benz COMAND MY08 Operator'S Manual Download

Page: 59 / 186

Audio

MP3 operation

If the MP3 tracks are organized into folders
on the CD, you can select a folder from the
COMAND control unit.

The following options are available:

Selecting via folder list

Selecting via extended folder list

Selecting via folder list

Only one folder can be viewed at a time.

Current folder

Open the MP3 main menu (

page 58);

Press

to select a folder.

Wait approx. 3 seconds without chang-
ing the selection.

The COMAND changes the folder and
loads the data from the new folder.

It may take a while to load the data, de-
pending on the number of folders and
tracks.

Selecting via extended folder list

In the MP3 main menu (

page 58),

press the

Folder

soft key.

The extended folder list appears.

Press

to select a folder.

Selecting folders

The folder list only contains folders in
which MP3 tracks are stored.

The extended folder list only contains
folders in which MP3 tracks are stored.

Summary of Contents for COMAND MY08



























































































































































































Search results

Summary of Contents for COMAND MY08

Reviews:

Related manuals for COMAND MY08

Brands by name

Popular brands

Mercedes-Benz COMAND MY08, Operator'S Manual

Search results

Summary of Contents for COMAND MY08

Reviews:

Related manuals for COMAND MY08

Brands by name

Popular brands