Mercedes-Benz COMAND MY08 Operator'S Manual Download

Page: 33 / 186

At a glance

Quick reference COMAND

Press

The cursor moves horizontally, adjust-
ing the balance accordingly.

Storing new settings:

Press

or the

Back

soft key,

wait until the display changes.

For the following operating modes, differ-
ent settings for bass and treble can be se-
lected:

Radio (FM waveband)

Radio (AM waveband)

Radio (Weather Band)

Single CD

MP3

CD changer*

AUX

Satellite radio*

Navigation*

Bass and treble settings for navigation an-
nouncements are found under “Adjusting
the acoustics for navigation announce-
ments” (

page 113).

When adjusting bass or treble, the system
automatically stores the setting for the
currently active operating mode.

Setting bass and treble

Open the main menu of the appropriate
operating mode (

page 29).

Press the

Bass

Treble

soft key.

The Bass or Treble menu appears.

Bass and treble

Summary of Contents for COMAND MY08



























































































































































































Search results

Summary of Contents for COMAND MY08

Reviews:

Related manuals for COMAND MY08

Brands by name

Popular brands

Mercedes-Benz COMAND MY08, Operator'S Manual

Search results

Summary of Contents for COMAND MY08

Reviews:

Related manuals for COMAND MY08

Brands by name

Popular brands