Mercedes-Benz COMAND MY08 Operator'S Manual Download Page 44

Page: 44 / 186

Audio

Radio operation

Ending Scan search manually

Press the

Scan

soft key again.

Manual tuning

Switch to the desired waveband
(

page 40).

Press

for at least 2

seconds to scroll up or down.

Manual tuning is activated.

Keep the button pressed or release it
and keep tapping

quick succession.

The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.

Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.

Tuning via direct frequency input

Entry example:

98.5 MHz in FM waveband

Switch to the FM waveband
(

page 40).

Press

The frequency input display appears.
The frequency range of the FM wave-
band is shown.

Manual tuning is also possible in all
wavebands by pressing

The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.

Frequency increments for manual

tuning:

FM 0.2 MHz

AM 10 kHz

Summary of Contents for COMAND MY08



























































































































































































Search results

Summary of Contents for COMAND MY08

Reviews:

Mercedes-Benz COMAND MY08, Operator'S Manual, Page: 44 / 186

Search results

Summary of Contents for COMAND MY08

Reviews: