Mercedes-Benz COMAND MY08 Operator'S Manual Download Page 170

Page: 170 / 186

170

System

System settings

Adjusting display brightness

In the Display Settings menu, press the

Bright.

soft key.

The Brightness display appears.

Press

The brightness changes accordingly.

Press the

Back

soft key or wait for the

screen to change.

The new setting is stored.

Actuating the Reset function resets
COMAND to the factory settings.

In addition, it deletes:

Telephone*: All phone book entries

SMS: All SMS messages.

Navigation*: All entries in the Destina-
tion memory and in the Last destina-
tions memory.

Reset activation

Call up the System menu (

page 166).

Press the

Reset

soft key.

A prompt appears asking if resetting
the system and deleting the data is re-
ally intended.

Use

to select the menu item

Yes

Press

You are prompted again to confirm if
you really want to reset the system and
delete the data.

Reset function

Summary of Contents for COMAND MY08



























































































































































































Search results

Summary of Contents for COMAND MY08

Reviews:

Mercedes-Benz COMAND MY08, Operator'S Manual, Page: 170 / 186

Search results

Summary of Contents for COMAND MY08

Reviews: