Metra Electronics 99-7431 Installation Instructions Manual Download

Page: 1 / 16

METRA. The World’s best kits.

™

metraonline.com

REV

. 5/16/2016 INST99-7431

Installation instructions for part 99-7431

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• A) ISO DDIN trim plate • B) ISO DDIN brackets • C) Radio housing • D) ISO DIN trim plate • E) Bracket set #1

• F) Bracket set #2 • G) Bracket set #3 • H) ISO DIN brackets • I) (4) #8 x 1/2 Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness:
• Please visit metraonline.com for harness options
Antenna Adapter:
• Please visit metraonline.com for antenna options

Nissan Multi Kit 1993-2004

99-7431

• Panel removal tool • Cutting tool
• Phillips screwdriver • Socket wrench

TOOLS REQUIRED

APPLICATIONS

See application list inside cover

Summary of Contents for 99-7431

















Search results

Summary of Contents for 99-7431

Reviews:

Related manuals for 99-7431

Brands by name

Popular brands

Metra Electronics 99-7431, Installation Instructions Manual

Search results

Summary of Contents for 99-7431

Reviews:

Related manuals for 99-7431

Brands by name

Popular brands