Mercedes-Benz 280 C, Owner'S Manual

Page: 276 / 337

Windows
Problem Possible cause/consequence Suggested solutions
A side window does not close
fully when you pull the switch
beyond the pressure point and
then release it.
G
Risk of injury
I An object has become trap-
ped between the window
and the door frame.
I There are objects in the win-
dow guide rail which are pre-
venting the window being
raised.
E
Open the side window again.
E
Remove the object(s).
E
Pull the switch beyond the pressure point and release it.
E
Make sure that nobody becomes trapped.
A side window does not close
fully when you pull the switch
beyond the pressure point and
then release it.
G
Risk of injury
You cannot see the cause.
E
Pull the window switch until the side window is closed.
E
Make sure that nobody becomes trapped.
The side window in the driver's
door does not close fully when
you pull the switch beyond the
pressure point and then release
it.
G
Risk of injury
You cannot see the cause.
The side window in the driver's
door stops during automatic
closing, the closing procedure is
interrupted and the window
opens again slightly.
E
Pull the switch until the side window in the driver's door is
closed.
If the side window in the driver's door has opened again slightly:
E
Pull the switch beyond the pressure point again within five
seconds and release it.
The side window in the driver's door is closed without the ob-
struction sensor.
Make sure that nobody can become trapped.
The obstruction sensor is switched back on again automatically
after approximately five seconds.
Practical advice
Troubleshooting
274
Nur fuer internen Gebrauch Nur fuer internen Gebrauch