Changing the bulbs in the side lamps
and parking lamps
E
Turn one of housing covers
2
or
3
anti-clockwise.
E
Pull out bulb holder
6
with the bulb.
E
Pull the bulb out of the bulb holder.
E
Push the new bulb into the bulb holder.
E
Insert the bulb holder into the head-
lamp and push it in.
E
Put on the housing cover and turn it
clockwise until it clips into place.
Changing the rear bulbs
Tail lamps
E
Switch off the lights.
E
Open the boot (
e
page 80).
E
Remove the trim.
or
E
Open the left-* or right-hand stowage
compartment in the boot.
1
Retaining clips
E
Press retaining clips
1
together and
remove the bulb holder with the bulb.
Right bulb holder, left reversed image
1
Rear foglamp/side marker lamp
2
Side marker lamp
3
Turn signals
4
Parking lamp and brake lamp/tail lamp
5
Parking lamp and brake lamp/tail lamp
6
Reversing lamp
E
Push the corresponding bulb back and
remove it from the bulb holder anti-
clockwise.
E
Insert the new bulb into the bulb holder
and turn it clockwise.
E
Reinsert the bulb holder and lock in po-
sition.
E
Close the side trim panel.
Practical advice
Changing the bulbs
289
Nur fuer internen Gebrauch
Nur fuer internen Gebrauch
Summary of Contents for 280 C
