Switching daytime running lamp mode
on or off (USA only)
X
Press button
=
or
;
to select the
Settings
menu.
X
Press button
:
or
9
to select the
Day Running Lamps
function.
X
Press button
a
.
X
Press button
a
again if you would like
to change the current status.
Depending on the previous status, the
Daytime Running Lamps
will be switched
on (
Enabled
) or off (
Disabled
).
With
Daytime Running Lamps
mode
Enabled
selected and the exterior lamp
switch at position
$
or
c
, the low-
beam headlamps are switched on when the
engine is running.
In low ambient light conditions the following
lamps will come on additionally:
R
Parking lamps
R
Tail lamps
R
License plate lamps
R
Side marker lamps
For more information on the daytime running
lamp mode, see “Lighting” (
Y
page 276).
i
Make sure the exterior lamp switch is set
to
M
or
c
when you switch off the
daytime running lamps while driving at
night.
Showing or hiding additional
speedometer
You can have an additional digital
speedometer shown in the multifunction
display. Depending on the setting for the
speedometer display mode (
Y
page 215), the
speed is shown in the unit of kilometers/hour
(setting
miles
) or miles/hour (setting
km
).
X
Press button
=
or
;
to select the
Settings
menu.
X
Press button
:
or
9
to select the
Add. Speedometer
function.
X
Press button
a
.
X
Press button
a
again if you would like
to change the current status.
Depending on the previous status, the
Add. Speedometer
will be switched
On
or
Off
.
Selecting speedometer display mode
X
Press button
=
or
;
to select the
Settings
menu.
X
Press button
:
or
9
to select the
Units
function.
X
Press button
a
.
X
Press button
a
again if you would like
to change the current status.
Depending on the previous status, the
Display Unit Speed-/Odometer
will be
switched to
miles
or
km
.
Instrument cluster control system
215
Control systems
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 215
Z
