Entering a street
i
It is not possible to enter a street if you
have already entered a city center.
i
You can only enter streets which are
available on the digital map.
If you have not entered a city before
entering the street, only those streets
within the state (USA) or province (Canada)
previously entered are available. If you have
already entered a city, streets within that
city are available.
If you have entered a zip code before
entering the street, only those streets
within the zip code area are available.
X
In the address input menu, select
Street
.
The list of streets appears either with or
without the predictive speller
(
Y
page 102). Whether or not the
predictive speller appears depends on how
many streets are available for the selected
city.
Street list with predictive speller
:
Top list entry based on the input data up
to that point
;
Characters entered by the user
=
Characters automatically added by the
system
?
Currently non-selectable characters
A
Currently selectable character
B
Predictive speller
C
Street list
D
Currently selected character
i
In predictive speller
B
, you can only
select currently selectable characters.
Which characters are included depends on
the sequence in which you have entered
your destination and the digital map.
The top list entry
:
first shows the street first
alphabetically and best corresponds to the
input data as it has been entered up to that
point.
As soon as you enter a character from
predictive speller
B
, the top list entry
:
shows the street which best matches to the
input data as it has been entered up to that
point.
At the same time, COMAND automatically
adds matching characters
=
to
characters
;
already entered by the user.
X
Selecting characters: Slide
X
V
Y
or
rotate
c
V
d
.
X
Confirming character selection:
Press
W
.
X
Deleting individual characters: Select
F
in the bottom line and press
W
.
X
Deleting an entire entry: Select
F
in the
bottom line and press
W
and hold until the
entire entry is deleted.
X
Canceling an entry: Select
%
in the
bottom line and press
W
.
or
X
Press back button
%
in the center
console (
Y
page 75).
As soon as COMAND can clearly attribute the
characters entered to a street, predictive
speller
B
disappears. You see the street list
without the predictive speller. Here you can
confirm the current entry or make another
selection.
During character entry, you can also manually
switch to the street list without predictive
speller at any time.
COMAND navigation system (entering a destination)
101
Control systems
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 101
Z