Calling an additional party
You can call another party during an active
call. The active call is put on hold.
X
Select
NEW
from the telephone menu and
press
W
.
or
X
Press button
6
on the telephone
keypad in the center console.
X
Enter the number to call manually
(
Y
page 143) or from the phone book
(
Y
page 149).
Switching between two parties (call hold)
When you are connected to two parties, the
telephone menu appears as follows:
:
Active call
;
Call on hold
X
Switching to the other party: Select
;
using the COMAND controller.
or
X
Press button
6
on the telephone
keypad in the center console.
or
X
Press button
6
on the multifunction
steering wheel.
Initiating a conference call
You can initiate a conference call with the
active parties and parties that are on hold. All
participants will be able to hear and talk to
each other.
:
Active call
;
Call on hold
=
Initiating conference call
X
Initiating conference call: Select
Conference
=
using the COMAND
controller.
COMAND phone book and address
book
G
Observe Safety notes, see page 68.
The COMAND phone book is an extract of
entries from the address book that contain at
least one phone number.
The COMAND address book holds entries
from various sources such as mobile phones,
SD cards, imports from Bluetooth
®
devices,
the COMAND phone book, or the navigation
system. These entries can be used for making
phone calls or for navigation.
Importing contacts automatically
When a mobile phone is connected to
COMAND via the Bluetooth
®
interface, the
contacts of the mobile phone are imported
into the COMAND phone book automatically.
This may take some time, depending on the
mobile phone. Phone book entries stored in
the mobile phone itself or the SIM card may
be imported, depending on the mobile phone.
Contacts in the COMAND that have been
imported automatically are identified by the
symbols
d
or
0
. Such contacts can only
146
COMAND telephone
Control systems
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 146
