Memmert VO Series Operating Manual Download Page 47

Page: 47 / 68

D39374 | Date 08/2018

Malfunctions, warning and error messages

Error description

Cause of errors

Rectifying errors

See

When switching on

the appliance, the

start animation is

displayed in another

colour than white

►

Cyan

Not enough storage

space on the SD card

►

Red

The system files could

not be loaded

►

Orange

: The

fonts and images

could not be loaded

Contact customer

service

Contact customer

service

Download the firm-

ware update from

memmert.com and

install it

Page 2

6.3

Power failure

In case of a power failure, the appliance operates as follows:

In manual mode

After power supply has been restored, operation is continued with the parameters set.

The time and duration of the power failure are documented in the log memory.

In timer or program mode

In case of an interruption of the power supply of less than 60 minutes, the current pro-

gramme is continued from the point at which it was interrupted. For interruptions of the

power supply longer than this, all appliance functions (heating, fan etc.) are switched off

and the air flap is opened.

In remote control mode

The previous values are restored. If a program has been initiated via remote control, it is

continued.

NOTICE

Please refer to the operating manual for the vacuum pump used in the event of a power

failure. It may need to be turned back on.

Summary of Contents for VO Series





































































Search results

Summary of Contents for VO Series

Reviews:

Related manuals for VO Series

Brands by name

Popular brands

Memmert VO Series, Operating Manual

Search results

Summary of Contents for VO Series

Reviews:

Related manuals for VO Series

Brands by name

Popular brands