Memmert VO Series Operating Manual Download Page 6

Page: 6 / 68

D39374 | Date 08/2018

For your safety

For your safety

1.1 Terms and signs used

In this manual and on the appliance itself, certain common terms and signs are used to

warn you of possible dangers or to give you hints that are important in avoiding injury or

damage. Observe and follow these notes and regulations to avoid accidents and dam-

age. These terms and signs are explained below.

1.1.1 Terms used

WARNING

Warns of a dangerous situation that might lead to death or

serious injuries

CAUTION

Warns of a dangerous situation that might lead to moderate

or minor injuries

NOTICE

Warns of material damage

1.1.2 Signs used

Signs used

Danger of elec-

trocution

Danger of

explosion

Dangerous

gases/vapours

Danger of burns

Danger of

toppling over

Gas bottles

Disconnect the

mains plug

Wear gloves

Observe informa-

tion in separate

manual

1.2

Product safety and dangers

The appliances described in this manual are technically sophisticated, manufactured

using high-quality materials and subject to many hours of testing in the factory. They

reflect the state of the art and comply with recognised technical safety regulations. How-

ever, there are still risks involved, even when the appliances are used as intended. These

are described below.

Summary of Contents for VO Series





































































Search results

Summary of Contents for VO Series

Reviews:

Related manuals for VO Series

Brands by name

Popular brands

Memmert VO Series, Operating Manual

Search results

Summary of Contents for VO Series

Reviews:

Related manuals for VO Series

Brands by name

Popular brands