Memmert VO Series Operating Manual Download Page 33

Page: 33 / 68

D39374 | Date 08/2018

Operation and control

2. By turning the turn control to the left

or right, adjust the set value (e.g. to

180.0

C).

3. Save the set value by pressing the con-

firmation key.

The display returns to normal and the

appliance begins adjusting to the de-

fined set value.

.2°C

TEMP

Set 180

.0°C

The settings for further parameters and functions (pressure) can be made accordingly.

If no new values are entered or confirmed for approx. 30 seconds, the appliance

automatically restores the former values.
If you want to abort the setting procedure, press the

activation key on the left or right of the display that

you want to exit. The appliance restores the former

values. Only the settings that you have confirmed by

pressing the confirmation key before cancelling the

setting procedure are accepted.

5.3.3

Operating modes

The appliance can be operated in different modes:

►

Manual mode: The appliance runs in permanent operation at the values set on the

ControlCOCKPIT. Operation in this mode is described in chapter 5.3.4 .

►

Operation with digital backwards counter with target time setting, adjustable from 1

minute to 99 days (timer): The appliance will run at the values set until the set time

has elapsed. Operation in this mode is described in chapter .

►

program mode: The appliance automatically runs program sequences which have

been defined using AtmoCONTROL software at a computer / laptop and then trans-

ferred to the appliance from a USB stick or via Ethernet. Operation in this mode is

described in chapter 5.3.6 .

►

By remote control

The status display shows which operating mode or operating state the appliance is cur-

rently in. The current operating state is highlighted in colour and indicated by the text

display:





Appliance is in program mode

■



program is stopped



Appliance is in manual mode

The example on the right shows the appliance in

manual mode, identified by the coloured hand symbol.

.4°C

TEMP

180

°C

Set

Manual Mode

12.Sept.2012 13:44

Summary of Contents for VO Series





































































Search results

Summary of Contents for VO Series

Reviews:

Related manuals for VO Series

Brands by name

Popular brands

Memmert VO Series, Operating Manual

Search results

Summary of Contents for VO Series

Reviews:

Related manuals for VO Series

Brands by name

Popular brands