Memmert HCP 108, Operating Instructions Manual

Page: 22 / 48

HCP page 22
6. Select temperature of first ramp segment 6. Select temperature of first ramp segment
Turn the push/turn control clockwise until the temperature display is
flashing.
Hold down the SET key and set the required temperature setpoint of
50.0
°C using the push/turn control.
°C
7. Select relative humidity of first ramp segment 7. Select relative humidity of first ramp segment
Turn the push/turn control clockwise until the humidity display is
flashing.
Hold down the SET key and set the required humidity setpoint of
95.0
%rh using the push/turn control.
%
rh
8. Set closure command of first ramp segment 8. Set closure command of first ramp segment
Turn the push/turn control clockwise until a segment closure command
(e.g.
end
) appears.
Hold down the SET key and set
SPWT [TH]
with the push/turn control.
9. Select duration of second ramp segment 9. Select duration of second ramp segment
Using the push/turn control select the time indication.
Hold down the SET key and set the time
00.45
using the push/turn
control.
h
10. Select temperature of second ramp segment 10. Select temperature of second ramp segment
Turn the push/turn control clockwise until the temperature display is
flashing.
Hold down the SET key and set the required temperature setpoint of
50.0
°C using the push/turn control.
°C
11. Select relative humidity of second ramp segment 11. Select relative humidity of second ramp segment
Turn the push/turn control clockwise until the humidity display is
flashing.
Hold down the SET key and set the required humidity setpoint of
95.0
%rh using the push/turn control.
%
rh
12. Set closure command of second ramp segment 12. Set closure command of second ramp segment
Turn the push/turn control clockwise until a segment closure command
(e.g.
end
) appears.
Hold down the SET key and set
nexT
with the push/turn control.
nexT nexT
13. Select duration of third ramp segment 13. Select duration of third ramp segment
Using the push/turn control select the time indication.
Hold down the SET key and set the time
00.01
using the push/turn
control.
h