HCP
page 42
21 Maintenance
Important for a long life of your MEMMERT product and in case of warranty claims.
Note:
Any work involving opening up the oven must only be carried out by a suitably qualified
Any work involving opening up the oven must only be carried out by a suitably qualified
electrician!
MEMMERT products require little maintenance. It is however recommended to lubricate all moving parts
of the doors (hinges and closure) once a year (or 4 times a year with continuous operation) using a thin
Silicone grease, and to check that the hinge screws are tight.
A well-closing door is essential on an oven. On MEMMERT ovens, tight closure of the door is ensured by
a seal on the oven and another one on the door. In continuous operation the flexible sealing material may
take a permanent set. Readjustment may then be necessary in order to ensure proper closing of the door.
The top part (1) of the door hinge can, after releasing the
2 screws (2) at the top or bottom of the door, be moved
slightly in the direction of the arrow.
The door can be adjusted after releasing the socket screw
(3) and rotating the excentric (4) by means of a screwdriver.
NOTE ! Screw (3) is locked with locking varnish. It can be
released by a sharp tug using a hexagon socket key. Apply
more locking varnish to screw (3) and tighten it.
The closing panel (6) can also be adjusted in the direction
of the arrow after releasing the screw (5). It is important
that the panel is then screwed down firmly.
5
6
Summary of Contents for HCP 108
Page 1: ...OPERATING INSTRUCTIONS Humidity Chambers HCP 108 HCP 153 HCP 246...
Page 2: ...HCP page 2...
Page 47: ...page 47...
