53
06/2021
Cooling unit CDP
7.3
Putting into operation
i
There must not be any coarse-grained particles in the water bath. This could damage
the pumping device.
7.3.1
Putting into operation for the first time
NOTICE
When putting the appliance into operation for the first time, do not leave it unattended until it has reached a steady state.
7.3.2 Connect the appliance to the power supply
Place the power cable so that
■
it does not represent a trip hazard
■
it cannot come into contact with any hot parts
■
it is easily accessible at all times and can be pulled off quickly, for example in case of
interference or an emergency
7.3.3 Filling the water bath
NOTICE
To operate the cooling unit, a minimum filling level of 70 mm is necessary. When filling and charging the water bath, please pay
attention to the maximum filling height, which must not be exceeded.
memmert
MIN
MAX
Summary of Contents for CDP115
Page 61: ...61 06 2021 Attachment...
Page 62: ...62 06 2021 Attachment...
Page 63: ...63 06 2021 Attachment...
