4
Installation
The machine is set up, installed and handed over ready
for use by the customer service. Due to the associated
hazards modifications to the installation or setup must
be carried out by the customer service only.
4�1
Prerequisites
Make sure that the following prerequisites are met
before you use the machine.
4�1�1
Water connection
The water connection must be easy to shut off at any
time during operation (shut-off valve). Any relevant
national regulations must be observed when connecting
this machine to the water supply, e.g., EN 61770.
The limit values for water pressure and carbonate
hardness as given in the technical data must be observed.
Only use a new hose set. Old or used hose sets are not
permitted to be re-connected.
The water drain must only be installed via a fixed connec-
tion with odor trap that is protected against backwater
and backflow.
This prevents contamination in the machine due to back-
flowing waste water.
4�1�2
Electrical connection
The supply voltage must match the specifications on the
nameplate.
The supply line must be protected at the site using a
residual current circuit breaker (RCCB) (max. 30 mA).
For connection via a mains plug, the socket must be
easily accessible during operation so that the plug can be
disconnected in the event of a fault.
Due to the high load, a separately fused circuit is required
for the machine.
4�1�3
Installation location
The machine is only to be installed and used in enclosed,
dry areas; it must not be operated outdoors.
The effects of humidity and temperature may adversely
affect the function and safety of the equipment.
The machine must always be installed and stored in frost-
free locations.
The installation area must provide sufficient distances
from walls and objects due to the heat generated and for
operation of the machine.
Distances
To the back
At least 5 cm
To the top
At least 20 cm
In self-service operation, the machine and all accessory
units must be installed in such a way that they can be
permanently supervised by trained personnel.
The machine must be positioned level and free of vibra-
tions. Adjustable feet are provided so that the unit can be
leveled out on slightly uneven surfaces.
4�1�4
Product material
Coffee beans must be suitable for use in commercial
coffee machines.
Extraneous matter, such as pieces of wood, stones, or
metal, etc., must be removed to prevent damage to the
grinder.
Ground coffee or instant powder must be suitable for use
in commercial coffee machines. Only use dry and loose
material without clumps.
To ensure cold milk foam of the best possible quality, use
ultra-heat treated (UHT) milk cooled to a temperature of
3 °C (±2 °C).
Do not use milk that has not been treated in a dairy.
Lactose-free milk, milk from animals other than cows,
soya milk, alternative sources of protein, or additives can
be used; then, however, the cleaning of the milk system
cannot be ensured. The machine's owner/operator
is responsible for any breakdowns and work by the
customer service team.
Installation
7
26646 • 20160202
4
