6�8
Multiple dispensing of a single product
Multiple portions of a product can be requested as
necessary and dispensed directly in sequence. The
advantage of multiple dispensing is that you do not need
to select the product again for every subsequent portion.
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
3. While the product is being dispensed, press the
"Repeat" button several times in succession
depending on the number of additional portions that
you would like to dispense.
͵
The products are prepared and dispensed in suc-
cession.
4. Once a portion has been dispensed, put the cup aside
and place another cup underneath the beverage
outlet.
9
The multiple dispensing operation is complete.
6�9
Batch mode
Batch mode can be used to preselect multiple products
and dispense them in sequence.
000157
SELECTION
PRODUCT
FILTER
UNIT
Espresso
***
Café Crème
Steam
Hot water
Latte Macchiato
Ristretto
***
Cappuccino
Milk foam
cold
Café Crème
Cappuccino
**
Espresso
***
2
1
3
Fig. 22: Batch mode
Depending on the preset in the manager menu (see
chapter 7.1 on page 20), the batch mode (1) can be
switched on and off by default.
To switch the batch mode itself on or off, press the bar for
the batch mode (1) on the right of the display.
Product dispensing in batch mode
1. With batch mode switched on, press the products to
be dispensed in sequence.
2. Press the "
" button (3) in the display to start dis-
pensing the first product.
3. Once a product has been dispensed from the batch,
remove it and position a suitable container for
the next product underneath the corresponding
beverage outlet.
000158
Cappuccino
**
SELECTION
PRODUCT
FILTER
UNIT
Pre-set batch input
Cappuccino
**
Espresso
***
1
2
Fig. 23: Product dispensing
4. Press the "
" button (1) to continue dispensing the
products.
͵
Once all products from the batch have been dis-
pensed, the machine returns to the start screen.
9
The products have been dispensed and the batch
mode is finished.
Removing products in batch mode
While products are being dispensed, you can remove
products from the batch.
1. Press the "Pre-set batch input" button (2).
2. Press the required product or the multiple selection
of a product.
3. Press the "X" button (2) (see Fig. 22) as follows:
•
Tap to delete a product.
•
Press and hold to delete this group of a multiple
selection of a product.
9
The product or multiple selection is removed from
the batch.
Dispensing products
18
26646 • 20160202
6
