background image

2.  Clean the inside of the refrigerator (if fitted), the 

door, and door seals with a conventional cleaner.

 

͵

Leave the door open during the entire cleaning 

process. Otherwise condensation could form and 

impair functioning.

000028

1

Fig. 38: Cleaning container

3.  Replace the milk container with the empty cleaning 

container (1).

4.  Depending on the equipment, insert one or both 

milk tubes into the cleaning container.

 

͵

Make sure that the milk tubes touch the bottom 

of the cleaning container.

Starting the cleaning program

The machine cleaning program normally runs 

automatically.

000152

Cleaning

Next cleaning today

Time

in

Clean touch screen

Clean full system

Clean and switch off full 

system

Information: Once cleaning has started it cannot be canceled!

SELECTION

PRODUCT 

FILTER

UNIT

1

Fig. 39: Starting the cleaning program

1.  On the display, press the "Unit" button (1).

 

͵

In self-service operation, you must first log in with 

a chip key (see chapter 5.1.4 on page 9). 

2.  Select one of the following options:

Button

Function

Clean full system

Clean the milk and brewing 

system, then continue machine 

operation

Clean and switch 

off full system

Clean the milk and brewing 

system, then the machine 

switches off

If prompted to clean the instant system first, complete 

this process first (see chapter 8.6.3 on page 31) and 

then confirm that it has been fully re-installed.

3.  First press "Instant system is cleaned" and then 

"Instant system installed".

Clean milk system (option)

The prompt "Cleaning agent milk system" is shown on 

the display.

1.  Insert a cleaning tablet into the prepared cleaning 

container.

2.  Use the "Cleaning agent was added" button to 

confirm that a cleaning tablet has been inserted.

Note

Replace the cleaning tablet for the milk system 

with AMC cleaner at every seventh cleaning 

(but at least once a week). This causes acidic 

cleaning of the milk part and prevents limescale 

and milk particle deposits forming.

Cleaning the brewing system

The prompt "Cleaning agent brewing system" is shown 

on the display.

000030

1

Fig. 40: Tab holder

1.  Open the machine door using the key.

Cleaning

30

26646  •  20160202

8

Summary of Contents for Cafina XT6





































Reviews: