Melitta Cafina XT6, Operating Instructions Manual

Page: 13 / 36

5�4 Confirming filling levels
The filling level must be confirmed at the machine each
time a supply container is filled.
000169
1
Filling levels
Bean container 1
SELECTION
PRODUCT
FILTER UNIT
Save
Fresh water
canister
Bean container 2
Instant con-
tainer 1
Instant con-
tainer 2
Milk type 1 Milk type 2
4
3
2
5 6 7
Fig. 11: Confirming filling levels
1. On the display, press the "Unit" button (5).
͵ In self-service operation, you must first log in with
a chip key (see chapter 5.1.4 on page 9).
2. Press the button "Filling levels" (3).
3. Press the required " T " button (1) above the filling
level displays to mark the following containers as full
(from left to right and top to bottom):
͵ Bean container 1 (front)
͵ Bean container 2 (rear)
͵ Instant container 1 (left)
͵ Instant container 2 (right)
͵ Fresh water canister
͵ Milk type 1
͵ Milk type 2
4. Save your changes using the "Save" button (4).
͵ Otherwise you will be prompted to confirm
whether you want to discard the changes or
whether you want to go back to save the changes.
9
The filling levels have been confirmed.
To return to the start screen, proceed as follows:
•
Self-service operation : Press the "Home" button (7).
•
Waiter operation : Press the "Selection" button (6).
You can adjust the filling levels even more accurately.
5. Press the required filling level display, e.g., of the
instant container 2 (2).
͵
A new window opens.
000170
1
Cocoa filling level
3
2
Apply
Limit value
Cancel
Designation
Fig. 12: Adjusting filling levels more accurately
6. Select one of the following options:
•
Press the "
T
" button (1) to mark the container
as full.
•
Touch the filling level display above or below the
bar (2) to adjust the filling level in steps.
•
Slide the bar (2).
7. Press the "Apply" (3) button to adopt the settings
and return to the previous screen.
8. Save your changes using the "Save" button (4) (see
Fig. 11).
͵
Otherwise you will be prompted to confirm
whether you want to discard the changes or
whether you want to go back to save the changes.
9
The filling levels have been confirmed.
If the filling level for a consumable drops below a set
value while a product is being dispensed, a warning will
appear on the display. If you confirm that the consum-
able has been refilled, you can then adjust the new filling
level straight away in a similar dialog as shown in Fig. 12.
5�5 Emptying the coffee grounds drawer
The coffee grounds drawer must be emptied if the coffee
grounds is not disposed of via the optional container
discharge.
When the coffee grounds drawer is almost full or full, the
message is displayed that the grounds drawer must be
emptied:
• If the coffee grounds drawer is 75 % full, only a few
more brewing processes can be carried out.
• If the coffee grounds drawer is 100 % full, only
products that do not release coffee grounds can be
dispensed. All other products are grayed out and
cannot be selected.
Operation
13
26646 • 20160202
5