Meiko UPster K, Operating Instructions Manual

Page: 16 / 40

9726766 16 / 40
Protective equipotential bonding
The screw for the potential equalisation
is located on the housing under the rins-
ing zone (view from the rear).
The potential equalisation bonding must be carried out in accordance with the re-
quirements of the local electricity supply companies and all applicable local regula-
tions (in Germany VDE 0100 Part 540). Incorporate the machine and any conduc-
tive substructures and table systems into the local potential equalisation system.
7.7 Temperature sensors/temperature limit switches
All safety temperature limiters and temperature sensors which have been loosely
rolled must be positioned in their correspondingly highlighted location.
CAUTION:
Do not bend the capillary filling pipe, as otherwise the tem-
perature probe could become damaged and unserviceable!
Observe the instructions on installation and removal in the
service instructions!
7.8 Fresh water connection
The water-carrying pipes and components are not frost-proof. If the temperature of
the place where the appliance has been installed can fall below 5°C, suitable pre-
cautions for protection against frost must be taken.

Information on nominal widths, diameters, etc. relate to the connections on the
machine.

Installations on site must be dimensioned to match local conditions (e.g. cable
arrangements, access lengths). Media and power connection of the machine
are described in the service instructions.

The connections must be made by approved professionals.

All parameters for the media and energy supplies must be maintained at a con-
stant level during all the operations.

Fresh water connections must be carried out in accordance with the require-
ments of the local regulations (e.g. Germany DIN 1988).

The owner/operator must install a shut-off device in each water supply
pipe/hose; the device must be accessible to operating personnel.

A backflow preventer is installed depending on the machine version. Refer to
the service instructions for more detailed information.