Meiko UPster K, Operating Instructions Manual

Page: 34 / 40

9726766 34 / 40
Maintenance work
C
H
E
C
K
E
D
C
LE
A
N
E
D
R
E
P
LA
C
E
D
Maintenance re-
quirement
8. Checking the function of the overall system
Check filling and heating until it is ready for operation at least once a year
Check dishes' final switch-off at least once a year
Visual inspection on the entire machine for leaks at least once a year
Visual inspection of the cable routing under the machine at least once a year
Check power consumption of all heating elements(IN see wiring di-
agram) at least once a year
9. Conveyor system
Check basket transport for fault-free operation at least once a year
Check gear motor at least once a year
Check mechanical overload cut-off at least once a year
10. Water quality, temperature
(record values)
Untreated
water
..…. °C ………… °dH ..…. µS/cm
at least once a year
PKSP: .....°C / WT2: .....°C / WT1: .....°C
KSP 1:
…. °C ….…... L/h
at least once a year
11. Drying (option)
Visual inspection of the motor and ventilation grid at least once a year
Installation space of the heating register, blower wheel and blower
wheel housing at least once a year
Clean air nozzles and suction grid at least once a year
.......................................................
.........................................................
Place, Date: Authorized service technicians:
17 Dismantling and disposal
In addition to valuable raw materials and recyclable materials, the packaging and
the old device may also contain substances that are harmful to health and the envi-
ronment and were required for the function and safety of the old device.
Please do not dispose of your old device in residual waste. Instead, contact your
dealer or the collection points set up in your community for information regarding
the disposal of your old device.
Pos : null /Übersc hrift en/ 1. 1/ Ents orgung des Ver pac kungs materi als @ 0 \ mod_1414757344181_6. doc x @ 840 @ @ 1
17.1 Disposal of packaging materials
Pos : null /Demontag e/ Entsorgung des Verpac kungsmat erials @ 0\ mod_1414757241588_6. doc x @ 838 @ @ 1
All the packaging materials are recyclable. The following materials are used:
–
Square timber frame
–
Plastic sheeting (PE film)
–
Cardboard packaging (edge protection)
–
Packaging strap (steel strip)
–
Packaging strap (plastic (PP))
Note
The square timber frame consists of untreated raw pine / spruce. In order to guard
against pests, country-specific import regulations may also stipulate the use of
treated wood.
Pos : null /Übersc hrift en/ 1. 1/D emontage und Entsorgung des Altg erät s @ 16\ mod_1580463813076_6. doc x @ 202227 @ @ 1