Meiko UPster K, Operating Instructions Manual

Page: 32 / 40

9726766 32 / 40
15.1 Basic safety measures during normal operation
DANGER
Risk of injury due to electric shock! Damage to property!
Switch off the power supply using the locally available mains disconnector prior to any
maintenance or repair work and secure it with a padlock!
The key for this lock must be kept in the hands of the person carrying out the mainte-
nance and repair work!
Failure to observe these precautions can result in severe injury or damage to property.
WARNING
Danger of injury from entering a danger zone
Unauthorised persons might be in or enter the danger zone during transport, assem-
bly, commissioning, maintenance and repair work. This can lead to injuries.
•
Only permit qualified persons to perform work at the machine.
•
Remove unauthorised persons from the danger zone.
•
Cordon off danger zone and signpost it for third parties.
•
Never remove or disable safety devices on the machine.
•
Always wear cut-resistant protective gloves when removing housing parts and
when working inside the machine!
Danger of scalding!
Before carrying out any maintenance and repair work, ensure that all the parts of the
machine that may be touched have cooled down to room temperature!
15.1.1 Before setting in operation - after maintenance and repair
works
Legal requirements relating to the avoidance of waste materials and to their recy-
cling/removal in accordance with applicable regulations must be observed!
In particular, during installation, repair and maintenance work, materials that could
pollute water must not pollute the ground or run into the sewerage system:

grease and oils

hydraulic oils

coolant

cleaning fluids containing solvents
These materials must be stored, shipped, collected and disposed of in suitable con-
tainers!