Meiko UPster K, Operating Instructions Manual

Page: 9 / 40

9 / 40 9726766
5.2 Measures to ensure safe system operation
The operator must ensure in particular that ...

A main switch is installed on site. The main switch must be easily accessible
and in the direct vicinity of the dishwashing machine.

The following requirements must be fulfilled:
– Load-break switch as per IEC 60947-3
– Utilisation category AC23B
– Lockable in OFF position
– Protection class against water IPX5
– The load-break switch must be installed in the direct vicinity of the
machine and must be easily accessible at a height of 0.6 - 1.9m
– Short-circuit breaking capacity >= 10kA
– Load-break switch rated operating current
– >= Machine's total current (type label) + 10%
– Neutral conductor shutdown optional

the dishwashing machine is used in accordance with the regulations only.
in case of other use or operation, damage or risks may arise for which we accept
no liability (cf. chapter "Intended use").

in order to preserve the operational and safety guarantees, whenever required,
only original parts supplied by the manufacturer are used. Any potential claims
by the user shall be rendered void if the system was altered using parts other
than original spare parts.

only appropriately qualified and authorized personnel use, maintain, and repair
the installation.

staff is regularly trained in all questions relating to occupational safety and en-
vironmental protection and, in particular, that staff is familiar with the operating
instructions as well as with the safety instructions they provide.

the dishwashing machine is only operated in a perfect, operationally efficient
condition and, in particular, that the safety systems and switch elements are
checked on a regular basis for their operational efficiency.

the required personal protective equipment is made available to and used by
maintenance and repair personnel.

the main switch must be turned off for cleaning.

a functional test on all safety systems of the installation is carried out during
every regular maintenance.

all the safety, warning and operating instructions provided are not removed and
are legible.

Regular checks on supply parts are carried out. If required, more detailed infor-
mation can be found in the relevant operating instructions.

there are no further modifications after assembly, commissioning and handover
of the dishwashing machine to customers/operators (e.g. electrical modifica-
tions or location changes). modifications to the dishwashing machine, and in
particular
technical modifications carried out without the manufacturer’s written
authorization, or any modifications carried out by unauthorized persons, will
lead to the complete loss of any guarantee claims and will invalidate any liability
for the product.

equipment for optimising energy consumption must not be used to reduce es-
sential operating temperatures, as set out in DIN 10511, 10512 and 10522. If
you, the client, install equipment for optimising energy consumption, any possi-
ble reduction in the quality of the wash and hygiene is your responsibility.