Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
9712938
We reserve the right to change execution and construction!
Page
34
of
48
15
M-iClean reporting list for operators
Press the confirmation key to acknowledge grey messages.
Red messages may require the deployment of authorised service technicians!
No.
Display text
Note / possible cause
Measures / remedial action
1
Floor pan leakage
Leakage available
You cannot continue working
with the machine.
Call a service engineer.
6
Programme cancelled
prematurely
On/off button activated during
wash programme.
Door opened during wash pro-
gramme.
Restart wash programme.
7
Door not closed
Door is open.
Magnetic switch defective or
adjusted incorrectly.
Close the door.
11
Maintenance needed
Carry out maintenance.
You can continue using the
machine.
Call a service engineer.
12
Access code wrong!
Input code not available in in-
ternal table
Correct entry code.
14
Heat lost through open
door!
Door is open.
Heat energy escaping.
Close door to prevent energy
loss.
100
First fill error
Reference level in tank not
reached in time during filling.
Level detection defective.
You cannot continue working
with the machine.
Call a service engineer.
101
Draining level not
reached.
Drainage sieve clogged.
Drain pump clogged/defective
Level detection defective.
Check the drainage sieve,
clean if necessary.
Call a service engineer if
needed.
102
Safety level does not
drop below level after
time
Drainage sieve clogged.
Drain pump clogged/defective
Level detection defective.
Supply valve does not close.
Shut off the building-side water
supply.
Switch off the fuses.
Call a service engineer.
103
Tank temperature not
reached
Tank set temperature is not
reached.
Temperature probe defective.
Heating defective.
E/A board is defective.
You can continue working with
the machine.
Call a service engineer.
104
Over-temperature tank
Maximum tank temperature
exceeded, check parameters.
Contactor / relay on E/A board
sticks.
Temperature sensor defective.
Switch off the building-side
fuses.
Call a service engineer.
106
Wash time increase in-
sufficient.
Tank heating defective.
Boiler heating defective
Supply valve defective.
If the error message reoccurs,
call a service engineer.
