Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
9712938
We reserve the right to change execution and construction!
Page
16
of
48
Small quantities of steam may escape through the machine's door. For this reason,
furniture and equipment situated near the door must be protected.
6.3
Instructions for disposal of packing material
•
The four-sided wooden frame consists of untreated, raw pine / spruce. Special
country-specific import regulations may also stipulate the use of wood which
has been treated against pests.
•
The plastic sheeting (PE sheeting) may be recycled.
•
The cardboard packaging material used to protect the edges can also be re-
cycled.
•
The hoop-casing strip made of steel can be recycled together with the steel
scrap.
•
The plastic tensioning strap of plastic (PP) can be recycled.
6.4
Operating conditions
It is assumed that the planning of the system, as well as installation, setting in op-
eration and maintenance works are executed by sufficiently instructed staff and
that these works are checked by responsible specialists. The details on the ma-
chine's type plate must match those of the standard drawing and the local connec-
tion conditions.
Conditions to be provided by the customer:
Frost free storage and installation area
Electrical connection in accordance with the technical sheet
Fresh water connection in accordance with the technical sheet
Waste water connection in accordance with the technical sheet
Anti-slip floor coverings should be provided around the dish-washing appli-
ance.
6.4.1 Requirements for the installation area
Ensure that the storage and installation area is permanently frost free.
The machine is only frost-proof in as-delivered state or if equipped with special fea-
tures (option: frost drainage).
If the machine is installed in an area where the surrounding temperatures are be-
low 0° C, water freezing inside the machine damage the internal water circuit com-
ponents (pump, solenoid valve, boiler, etc.).
