Megger SMART THUMP ST16, User Manual

Page: 30 / 62

M
AVTMST16 Rev 1 May 2016
20
Menu item Description
Import from
USB
Imports a cable list from an inserted USB drive. The cable list must
be located in the
CableLists folder.
Export to
USB Exports the selected cable list to the CableLists folder on the USB
drive.
Remove
cable list Removes the selected cable list from internal memory.
User mode Menu item to select the User Mode which is the default after start-up.
If set to Last, the unit starts up in last active mode, recommended is to set to
QUICK STEPS .
Backlight settings Backlight timeout and contrast settings
Time Out Settings Minutes of inactivity after which the system is automatically shut down.
Stored Traces
Menu item to export or delete all traces which have been stored in the internal
memory.
Exporting traces requires a USB flash drive plugged into the USB port . The
traces are written into the EtrayTraces folder which is automatically created.
The data can be viewed in any regular web browser by opening the index.html file
which is also located in the EtrayTaces folder.
System information Displays the detailed hardware and software configuration of the unit.
Change password Menu item to change the password required to enable the EXPERT MODE .
Customize TDR
features Menu item to configure the options which are available during measurement, See
page 45.
Return By leaving the EXPERT MODE through this menu item, the new settings are
saved.