mecalac TA3.5SH, Original Instructions Manual

Page: 7 / 136

TA3H, TA3SH & TA3.5SH Page 1 - 1
1. Introduction
1 Introduction
1.1 Important Information
Please read and follow this manual carefully. If you use the machine correctly:
• You will stay safe.
• Your machine will perform better and last longer.
We strongly recommend
• That your machine is properly maintained and regularly serviced, as specified in this manual.
• That you use original spare parts obtained from a Mecalac dealer.
We continually make improvements to these machines. We reserve the right to amend the
machine without changing these instructions.
Any modification to this machine which has not been approved by Mecalac in writing is prohibited
and immediately invalidates the manufacturer’s warranty.
The operator of this machine must be a competent person who has received thorough training
in the use of this type of machine. The operator must be supervised by a knowledgeable
supervisor .
For further information, please contact the Mecalac Service Department who will be happy to
help you.
1.2 Safety Alert System
The Safety Alert System identifies important safety messages in this manual. When you see this
symbol, adhere to all safety messages that follow to avoid possible injury or death.
1.3 Intended Use
The machine has been designed and tested to carry out the function of transporting various free
flowing materials. If used correctly, it will provide an effective means of transportation and meet
the appropriate performance standards and regulations.
This machine is not suitable for under ground working or use in hazardous environments.
Use of this product in any other way is prohibited and contrary to its intended use
1.4 Operations Manual
This manual is a guide to the safe operation of the machine and the layout and position of all
controls. It also contains details of checks and procedures within the scope of the operator to
keep the machine in a safe and serviceable condition.
This manual is not a training manual. Contact Mecalac or your local dealer for details of suitable
training courses.
Any person who intends to use this equipment must read this operations manual carefully before
operating the machine.
Make sure this operations manual is kept with the machine at all times and is in good condition
- replace the manual immediately if it becomes dirty, damaged or has been lost. The manual
holder is located in the back of the seat (Figure 1.1) and is lockable