mecalac TA3.5SH, Original Instructions Manual

Page: 19 / 136

Page 2 - 6 TA3H, TA3SH & TA3.5SH
2. Safety
• When manoeuvring or driving the machine with the skip raised take extreme care as forward
visibility will be restricted.
• Do not drive around the site with the skip raised.
• The operator must get off machine when loading the dumper skip.
• Do not drive the machine on the public highway with the skip in the fully tipped position.
If anyone has any concerns with any safety aspect of the machine the problem must be
reported and the machine must not be used until the safety concerns have been rectified
or an authorised person has checked and satisfied the site personnel the machine is safe
to use.
2.5 Seat Belt
A seat belt is provided for operator safety. It is important that the seat belt is inspected and
checked regularly
See Maintenance Section.
Failure to properly inspect and maintain a seat belt can result in death or serious injury.
The seat belt MUST be worn at all times when operating this equipment.
An optional green beacon is available. The green beacon shows from a distance that teh dumper
driver is wearing his seatbelt. The beacon is mounted on the ROPS frame and flashes when in
operation. Do not use the green beacon on a public highway.
2.6 ROPS
A ROPS (Roll Over Protective Structure) is provided for operator safety.
Although ROPS appear to be relatively maintenance-free, regular periodic inspections to make
sure ROPS are damage free and thus capable of functioning in a roll over cannot be over
emphasized.
Through periodic inspections, cracks, loose bolts, damage, and other normal wear and tear
related problems can be eliminated before they become serious.
Proper inspection and maintenance procedures can make sure that ROPS will perform the life
saving function they are designed for and expected to do.
Details on the inspection and maintenance of the ROPS will be found in the Maintenance
Section .
A damaged ROPS must be replaced by a genuine part from the original manufacturer of the
machine and fitted by an authorised dealer.
Do NOT modify or attach items to the ROPS without the manufacturers approval.
Do NOT use the ROPS as an attachment point for towing or pulling equipment.
2.7 Lockout and Tag Out
To prevent unauthorised starting of the machine, before any maintenance you must always:-
• Apply parking brake.
• Place transmission in Neutral
• Remove start key.
• Turn battery isolator to OFF and remove key
• Place warning notice in a prominent position warning others not to attempt to start or drive the
machine.