TA3H, TA3SH & TA3.5SH
Page 9 - 25
9. Maintenance
(2)
To Change the Oil
To ease draining make sure the oil in the axles is warm.
9.24
Rear Axle/Transfer Box
The rear axle and transfer box are a combined unit illustrated in Figure 9.24. For servicing
intervals refer to the Servicing Schedule in this book
.
Figure 9.24 - Rear Axle/Transfer Box
PROCEDURE
Park the machine on firm, level ground.
Clean the dirt from around the plugs.
Remove the oil level plug - 2.
The oil should be level with the bottom of the hole.
To add oil, remove the filler plug - 1.
Add the correct grade of oil through the filler plug until it begins to discharge from the level
hole.
Re fit and tighten the level and filler plugs.
PROCEDURE
1.
Park the machine on firm, level ground.
2.
Clean the dirt from around the plugs.
3.
Place a suitable container under the drain plug
4.
Remove the filler plug and drain plug and permit the oil to drain.
5.
When oil has fully drained clean and refit the drain plug.
6.
Remove the level plug.
7.
Add the correct grade of oil through the filler plug until it begins to discharge from the level
hole.
8.
Re fit and tighten the level and filler plugs.
COV00023
1
2
3
4
5
Summary of Contents for TA3.5SH
