Mec Mast Series Service & Parts Manual Download Page 20 | Manualshive

Page: 20 / 116

background image

Page 15

Mast Seres - Servce & Parts Manual

May 2021

General Machine Maintenance

Instructions in this portion of the manual are to be used in conjunction with the Pre-Start, Frequent
and Annual Inspection checklists found in this machine’s Operator’s Manual.

IMPORTANT: Scheduled maintenance inspection checklists are included in the Operator’s

Manual for use only by qualified service technicians�� Only qualified service
technicians may perform repairs to the machine�� After repairs are completed,
the operator must perform a Pre-Start Inspection before proceeding to the
Functions Test��

HYDRAULIC FLUID UNDER PRESSURE CAN PENETRATE AND BURN
SKIN, DAMAGE EYES, AND MAY CAUSE SERIOUS INJURY, BLINDNESS,
AND DEATH�� REPAIR LEAKS IMMEDIATELY�� FLUID LEAKS UNDER
PRESSURE MAY NOT ALWAYS BE VISIBLE�� CHECK FOR PIN HOLE
LEAKS WITH A PIECE OF CARDBOARD, NOT YOUR HAND��

NEVER PERFORM WORK OR INSPECTION ON THE MACHINE WITH
THE PLATFORM ELEVATED WITHOUT FIRST BLOCKING THE SCISSOR
ASSEMBLY WITH THE MAINTENANCE LOCK (SEE THE INTRODUCTION
PORTION OF THIS MANUAL)��

PERFORM SCHEDULED MAINTENANCE AT RECOMMENDED INTERVALS��
FAILURE TO PERFORM SCHEDULED MAINTENANCE AT RECOMMENDED
INTERVALS MAY RESULT IN A DEFECTIVE OR MALFUNCTIONING
MACHINE AND MAY RESULT IN INJURY OR DEATH OF THE OPERATOR��
KEEP MAINTENANCE RECORDS CURRENT AND ACCURATE��

IMMEDIATELY REPORT ANY DAMAGE, DEFECT, UNAUTHORIZED
MODIFICATION OR MALFUNCTION TO YOUR SUPERVISOR�� ANY DEFECT
MUST BE REPAIRED PRIOR TO CONTINUED USE�� DO NOT USE A
DAMAGED, MODIFIED OR MALFUNCTIONING MACHINE��

Never leave hydraulic components or hoses open�� Plug all hoses and
fitting immediately after disassembly to protect the system from outside
contamination (including rain)��

Never open a hydraulic system when there are contaminants in the air��

Always clean the surrounding area before opening hydraulic systems��

Use only recommended lubricants�� Improper lubricants or incompatible
lubricants may cause as much damage as no lubrication��

Watch for makeshift “fixes” which can jeopardize safety as well as lead to
more costly repair��

Inspection and maintenance should be performed by qualified personnel
familiar with the equipment��

Secton 10 - Mantenance

General Machine Maintenance

«
...
18
19
20
21
22
...
»

Summary of Contents for Mast Series





















































































































Reviews:

No comments

Related manuals for Mast Series

Brand: DayTronic Pages: 414

Brand: WAREMA Pages: 112

WAGO-I/O-SYSTEM 750 XTR Series

Brand: WAGO Pages: 272

Brand: WAGO Pages: 450

Brand: Baier Pages: 20

Brand: Telwin Pages: 108

RIS 700PE EKO 3.0

Brand: Salda Pages: 36

Brand: WEST Pages: 2

Brand: National Instruments Pages: 9

Brand: STAMOS Pages: 27

Brand: CAME Pages: 128

Brand: GYS Pages: 40

Trailblazer 251

Brand: Miller Pages: 48

USB-1408FS-Plus-OEM

Brand: Measurement Computing Pages: 26

Brand: Automated Logic Pages: 3

Brand: BHM Medical Pages: 56

Brand: Sanela Pages: 7

Brand: Thermal Dynamics Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands