Page 13
Mast Seres - Servce & Parts Manual
May 2021
Secton 9 - Transport and Lftng Instructons
Transport and Lifting Instructions
Securing to Truck or Trailer for Transit
Always chock the machine wheels in preparation for transport.
Retract and secure the extension deck.
Turn the key switch to the OFF position and remove the key
before transporting.
Inspect the entire machine for loose or unsecured items.
Use the tie-down points on the chassis for anchoring down to
the transport surface.
Use a minimum of four chains or straps. Use chains or straps
of ample load capacity.
Do not overtighen chain binders.
Lifting the Machine with a Forklift
Be sure the extension deck, controls and component trays are
secure. Remove all loose items on the machine.
Fully lower the platform. The platform must remain lowered
during all loading and transport procedures.
Art_5671B
Use the forklift pockets located at the rear of the machine.
Position the forklift forks in position with the forklift pockets.
Drive forward to the full extent of the forks.
Raise the machine 6 in / 15 cm and then tilt the forks back slightly to keep the machine secure.
Be sure the machine is level when lowering the forks.
Lifting the machine from the side can result in component damage�����
