Page 45
Mast Seres - Servce & Parts Manual
May 2021
Secton 14 - Parameter Adjustments
Drive Elevated Speed
Elevated Drive Speed is an important safety parameter set at the factory�����
Changing this parameter should only be conducted with express
instructions from MEC Product Support Department�����
Press DRIVE button. Press and hold the HORN button to select
Drive Elevated Speed adjustment. Keep it held while adjusting
the speed. The display will indicate the present set value. Adjust
the speed using the RIGHT TURN (Increase) or LEFT TURN
(decrease) button on top of the Joystick.
1.
ART_5785H
The value can be changed from 00 to Max Speed (see table
below) with the buttons on top of the Joystick.
Position
Drive Speed
Stowed
3.7 ft/sec (1.11 m/sec)
Raised
1.03 ft/sec (0.31 m/sec)
2.
ART_5785I
Lift Speed
Press LIFT button. The LIFT LED indicates this mode is active.
Adjust the speed using the RIGHT TURN (Increase) or LEFT
TURN (Decrease) button on top of the Joystick.
1.
ART_5785J
The value can be changed from 00 to 100 (displays 9˙9) with the
buttons on top of the Joystick.
2.
ART_5785F
Steering Speed
Press DRIVE button. Press and hold the HORN and LOW SPEED
buttons to select. Drive Steering Speed adjustment. Hold these
buttons while adjusting the speed. Display indicates the present
set value. Adjust the speed using the RIGHT TURN (Increase) or
LEFT TURN (Decrease) button on top of the Joystick.
1.
ART_5785K
The value can be changed from 00 to 100 (displays 9˙9) with the
buttons on top of the Joystick.
2.
ART_5785F
