Mec Mast Series Service & Parts Manual Download Page 51

Page: 51 / 116

Page 46

Mast Seres - Servce & Parts Manual

May 2021

Secton 14 - Parameter Adjustments

Machine Options State - Selecting Machine Options

Press and hold the LIFT and HORN buttons while pulling the
PCU’s E-Stop out to select Machine Options adjustment.

ART_5785Q

“PS” and Elevated Speed value will alternatively flash on the
display.

ART_5785D

Release LIFT and HORN buttons.

ART_5785L

“PS” will change to Lift Speed.

ART_5785F

Getting To The Machine Option Selection Mode

Press and hold the LIFT and LOW SPEED buttons for 3 seconds
to enter the Machine Option selection mode.

ART_5785M

“SC” is displayed when in Machine Option selection mode.

ART_5785N

Entering The Machine Option Selection Mode

Momentarily press DRIVE button to edit the right digit. The digit will
be flashing.

ART_5785E

Summary of Contents for Mast Series





















































































































Search results

Summary of Contents for Mast Series

Reviews:

Related manuals for Mast Series

Brands by name

Popular brands

Mec Mast Series, Service & Parts Manual

Search results

Summary of Contents for Mast Series

Reviews:

Related manuals for Mast Series

Brands by name

Popular brands