Page 12
Mast Seres - Servce & Parts Manual
May 2021
Brake Release Instructions
Observe and Obey:
Common sense and planning must be applied to control the movement of the machine when
lifting it with a crane or forklift.
Only qualified aerial lift operators should move the machine on or off the truck.
The transport vehicle must be parked on a level surface.
The transport vehicle must be secured to prevent rolling while the machine is being loaded.
Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the
machine weight. See the serial label for the machine weight.
The machine must be on a level surface or secured before releasing the brakes.
Only qualified forklift operators should lift the machine with a forklift.
Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the
machine weight. See the serial plate for the machine weight.
Brake Release Operation
Chock the wheels to prevent the machine from rolling.
Pull out the red Emergency Stop button on both the ground and platform controls to the ON
position.
Press and hold lift switch to “DOWN” position in ground control, meanwhile turn on the key
switch to the Ground position. The brake will be released after Alarm alerts.
If you want to apply the brakes, just turn off the key switch or push the Emergency stop buttons.
Push the red Emergency stop button on both the ground and platform controls to the OFF
position.
When the machine is towed, do not exceed 2.5 mph / 4.0 km/h.
•
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
Brake Release Instructions
Secton 9 - Transport and Lftng Instructons
