Page 44
Mast Seres - Servce & Parts Manual
May 2021
Parameter Adjustment
Speed Adjust State
Press and hold HORN and LIFT buttons while pulling the PCU’s
E-Stop (Out) to enter Speed Adjust State.
1.
ART_5785C
“PS” and current Lift Speed are alternately flashing on the display.
Release LIFT and HORN buttons.
2.
ART_5785D
Drive High Speed with Platform Stowed
Press DRIVE button. The DRIVE LED indicates this mode is
active. Adjust the speed using the RIGHT TURN (Increase) or
LEFT TURN (Decrease) button on the top of the Joystick.
1.
ART_5785E
The value can be changed from 00 to 100 (displays 9˙9) with the
buttons on top of the Joystick.
2.
ART_5785F
Drive Low Speed
Press DRIVE button. Press and hold the LOW SPEED button to
select Drive Low Speed adjustment. Keep it held while adjusting
the speed. The display indicates present set value. Adjust using
the RIGHT TURN (Increase) or LEFT TURN (Decrease) button on
top of the Joystick.
1.
ART_5785G
The value can be changed from 00 to 100 (displays 9˙9) with the
buttons on top of the Joystick.
2.
ART_5785F
Secton 14 - Parameter Adjustments
Parameter Adjustment
