LaserAce® Pocket Series
Issue 1.0
© Copyright 1999-2008 Measurement Devices Limited
Page
53
Copying of the materials in this document is prohibited
Pressing the
■
key after a shot accumulates the results.
To take another measurement press the
FIRE
button and continue to follow the method described above.
NOTE
: From any screen pressing the
●
key (continuously) will return the Hypsometer back to the main menu.
Accumulators
: If you wish to show an accumulation of data (Slope and HD) then in either screen press the
■
key, this displays a sum of all SD and HD values acquired. Press
■
key from the accumulator display to return
to the previous screen.
If using any value other than NIL on the stadia scope, the Hypsometer will, in addition to calculating log length
and lean, also measure the log diameter and calculates the log volume. The first screen after shooting the top
displays log length, log diameter and log volume. Pressing the triangle key displays log lean, height and hd
(horizontal distance). The
■
key accumulates log volume and length.
Critical height, which is entered in setup/offsets menu, is used in two-point height method. After shooting the
bottom of the tree, the user pans (elevates) the unit to aim towards the tree top. If the critical height is reached
while the user is moving the unit, the Hypsometer sounds continuously, this feature is useful if trees below a
certain height are to be measured (refer to 7.4.3 to set Critical Height).
