MDL LaserAce Pocket Series Manual Download Page 4

Page: 4 / 74

LaserAce® Pocket Series

Issue 1.0

Page

Copying of the materials in this document is prohibited

Quick User Guide

1.1

LaserAce® Survey

To start

•

Press the red ‘fire’ button on top of the instrument. The unit starts up confirming the unit type (ie.
Survey), date and version, and then Bluetooth® and compass

•

The main menu gives you a list of options/ or modes

•

To select a mode use the

▲

button

to enter that mode press the red fire button

•

The mode will ask you specific instructions

•

NOTE: To go back (at any time) press the

●

button.

Menu/ Setup

•

Firstly, you need to enter your offset height, which is the height from the ground to your eye level

•

Select ‘Setup’

•

Within setup, select ‘3. Offsets’ (by using the

▲

button)

•

Select ‘Instrument HT’

•

Using the

■

button change the numbers. The

▲

button moves along the numbers

•

Press the red fire button to confirm

•

Press the

●

button to go back to the main menu

•

YOU ARE READY TO GO.

1. Rangefinder

•

Select ‘1. Rangefinder’ mode by pressing the red fire button

•

The screen will show:

__________________________

___________________________

HA - COMPASS

•

Point at your target and press the red fire button

2.9

114.2

HA - COMPASS

18.08

•

Press the

▲

button to see horizontal distance and vertical distance.

Summary of Contents for LaserAce Pocket Series










































































Search results

Summary of Contents for LaserAce Pocket Series

Reviews:

Related manuals for LaserAce Pocket Series

Brands by name

Popular brands

MDL LaserAce Pocket Series, Manual

Search results

Summary of Contents for LaserAce Pocket Series

Reviews:

Related manuals for LaserAce Pocket Series

Brands by name

Popular brands