MDL LaserAce Pocket Series Manual Download Page 12 | Manualshive

Page: 12 / 74

background image

LaserAce® Pocket Series

Issue 1.0

© Copyright 1999-2008 Measurement Devices Limited

Page

12

Copying of the materials in this document is prohibited

3

Introduction

LaserAce® Pocket Series comes in three versions:

•

LaserAce® Burden Finder, for measuring burden measurements in the Quarry market (separate
manual)

•

LaserAce® Survey, designed as a general survey tool, and

•

LaserAce® Hypsometer, specifically designed for foresters and arborists to aid in tree measuration.

This manual is the users guide for:

•

LaserAce® Survey, or

•

LaserAce® Hypsometer.

Most of the instructions for these are identical and where they differ the text is annotated accordingly or separate
sections have been provided in this document.

3.1

LaserAce® Pocket Series

LaserAce® Pocket Series with built-in inclinometer and compass

LaserAce® Pocket Series is a hand-held laser range finder providing you with personal surveying capability. It
enables the professional surveyor, engineer or general user to measure range, height, slope, missing distance,
diameter, widths of objects and even cables with ‘point and shoot’ simplicity.

LaserAce® Pocket Series incorporates a pulsed laser distance meter, inclinometer and compass. The sighting
scope allows the operator to aim and measure range, vertical and horizontal angles to passive targets up to
150m (500’) away with 5cm (2”) accuracy. Using reflective foil the operator can measure to targets up to 600m
(2000’) away.

The palm-sized LaserAce® Pocket Series is Class 1 eye safe (FDA/ IEC) and weighs only 400g/ 14oz.
Measurements and calculations are displayed on a custom back-lit LCD panel. Data output is available through
Bluetooth® and can be configured to interface the LaserAce® to a range of data loggers, palm and pen
computers.

«
...
10
11
12
13
14
...
»

Summary of Contents for LaserAce Pocket Series











































































Reviews:

No comments

Related manuals for LaserAce Pocket Series

Brand: Kathrein Pages: 10

Brand: SAGEMCOM Pages: 33

Brand: Keithley Pages: 44

Brand: Keithley Pages: 76

Brand: Keithley Pages: 12

Brand: Keithley Pages: 281

Brand: ICS Schneider Messtechnik Pages: 40

Brand: bmcm Pages: 5

Brand: Tektronix Pages: 48

Brand: TSI Instruments Pages: 4

Brand: Dynojet Pages: 88

Brand: VP instruments Pages: 15

Brand: Aalborg Pages: 56

Brand: Vega Pages: 20

C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1

Brand: Sierra Pages: 55

Brand: National Instruments Pages: 24

Brand: STATICO Pages: 21

Brand: Fluke Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands