MDL LaserAce Pocket Series Manual Download Page 16

Page: 16 / 74

LaserAce® Pocket Series

Issue 1.0

Page

Copying of the materials in this document is prohibited

4.2

Electromagnetic Compatibility and Emissions

The LaserAce® Pocket Series meets or exceeds the requirements of the following European Standards:

EN 55022:

1998

Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.

EN 55024

: 1998

Information Technology Equipment – Immunity Characteristics –
Limits and Methods of Measurement.

EN 55024 refers to the following specifications:-

EN 6100-4-2

: 1995

Electromagnetic Compatibility Part 4. Testing and
Measuring Techniques. Section 2. Electrostatic
Discharge.

EN 61000-4-3

: 1996 + A1

Electromagnetic Compatibility Part 4. Testing and
Measuring Techniques. Section 3. Electromagnetic
Field Immunity.

4.3

Batteries

Dispose of used batteries sensibly. Under no circumstances must the batteries (or instrument) be disposed of by
burning.

EXPLOSION MAY OCCUR

4.4

Hazardous Substances

This product may contain substances that can be hazardous to the environment if not disposed of properly.

Summary of Contents for LaserAce Pocket Series










































































Search results

Summary of Contents for LaserAce Pocket Series

Reviews:

Related manuals for LaserAce Pocket Series

Brands by name

Popular brands

MDL LaserAce Pocket Series, Manual

Search results

Summary of Contents for LaserAce Pocket Series

Reviews:

Related manuals for LaserAce Pocket Series

Brands by name

Popular brands