LaserAce® Pocket Series
Issue 1.0
© Copyright 1999-2008 Measurement Devices Limited
Page
40
Copying of the materials in this document is prohibited
Distance measurement can be in metres or feet and the inclination in degrees or gons (refer to section 7.4 for
user preferences).
By pressing the
▲
key the HD (Horizontal Distance) to the target and VD (Vertical Distance) to the target will be
displayed, along with HA (Horizontal Angle). Press the
▲
key again to return to the original SD and VA display.
A “+” sign following VD (VD+) means an instrument height offset is added (your height from ground to eye level)
to give the vertical distance of the target. If the instrument height offset in set up is set to zero, then the vertical
height is the height of the target from the instrument level (it will not show the “+” sign).
Note: From any screen pressing the
●
key returns the instrument to the main menu.
To take a new measurement, sight the target and press the FIRE button. This displays the opening screen
containing SD (slope distance), VA (vertical angle) and HA (horizontal angle) information.
Accumulators: If you wish to show an accumulation of data (Slope and HD) then in either screen press the
■
key, this displays a sum of all SD and HD values acquired. Press
■
key from the accumulator display to return to
the previous screen.
