LaserAce® Pocket Series
Issue 1.0
© Copyright 1999-2008 Measurement Devices Limited
Page
7
Copying of the materials in this document is prohibited
6. RAPID FIRE
•
Select ‘6. RAPID FIRE’ - Rapid Fire has been designed to find the height of over hanging cables
•
The LCD screen now shows:
FIND WIRE
SHOOT GROUND
•
Point and shoot ground. The unit then asks ‘FIND WIRE’. Pointing the unit to the wire, hold down the
fire button and scan over the wire until the unit find it. When detected it will show the measurements.
1.2
LaserAce® Hypsometer
See 1.1 ‘To start’ section of LaserAce® Survey.
See 1.1 ‘Menu/ Setup’ section of LaserAce® Survey.
See 1.1 ‘Rangefinder’ section of LaserAce® Survey.
See 1.1 ‘Subtended Distance’ section of LaserAce® Survey known as Tree Diameter in the LaserAce®
Hypsometer. This is the same method.
3. Length/ Lean/ Vol
•
Select ‘Length/ Lean/ Vol’
•
It will ask you for a ‘Tapering %’ – for now ignore this (See section 10.3)
•
Press the red fire button
•
The LCD screen now shows:
DOWNLOAD
PRINT TREE TABLE
3. THREE POINT
LENGTH/ LEAN/ VOL
1. SINGLE POINT
2. TWO POINT
•
For now we will concentrate on three point heighting.
