MCL nanoSwitch, Installation Manual

Page: 2 / 52

2
1
3
4
5
6
59, Bownham Park,
Rodborough Common,
Stroud, Glos.,
GL5 5BZ
United Kingdom
Tel: +44 (0)1453 873399
Fax: +44 (0)1453 873399
email: support@marinex.co.uk
web: www.marinex.co.uk
Document History
Version Date Notes
1 07/2008 First Issue
2 06/2009 Correction of typing errors
Marine Communications Limited
Regulatory information
nanoSwitch
nanoSwitch Telephone Exchange has been designed to meet British Telecom standards.
nanoSwitch is designed for use on-board ships. It may not comply with specific statutory local PTT
requirements for use in some countries.
Maintenance
Maintenance of nanoSwitch must only be performed by Marine Communications Limited or its authorised
agent. The user may not make any changes and/or repairs except as specifically noted in this manual.
Unauthorised alterations or repairs may affect the approval status of the system and void any remaining
warranty.
There are no serviceable components in the exchange. Board replacement is the only method of service.
Faulty boards to be returned to Marine Communications Limited or its authorised agent.
Radiated Emissions
nanoSwitch complies with the current rules regarding radiation and radio frequency emission as defined
by the European EMC CE marking.
This equipment generates and uses R.F. energy and if not installed and
used in accordance with the instruction manual may cause interference.
Telephone Compatibility
Marine Communications Limited’s nanoSwitch Telephone Exchange has been designed to work with
most telephone instruments worldwide. However satisfactory performance cannot be guaranteed for every
allowable combination of host and subsidiary apparatus.
Only telephones which use DTMF signalling can be used. It will not work with Loop Disconnect (LD) or
pulse telephones.
All telephones over 15 years old should be replaced with modern telephones.