MCL nanoSwitch, Installation Manual

Page: 34 / 52

7-2
7
Extension Commissioning nanoSwitch Installation Guide
7-3
7
nanoSwitch Installation Guide Extension Commissioning
The commissioning mode schedule on the pages 7-4 needs to be carried out from each
extension.
When all of the extensions have been tested and the commissioning mode has been deactivated,
the following engineering codes are available. The codes are accessed by entering the following
sequence
# Distributor ID & Passcode *6
.
603
- print the commissioning report
604
- remove commissioning mode from system - Use with care
605
- Clear the commissioning report. (This is useful before entering the commisioning mode
for the first time)