McFarlane WDL-2000, Operator'S Manual And Set-Up Instructions

Page: 9 / 58

9

As a precaution, always recheck the hardware on equipment periodically. Correct all problems.
Follow the maintenance safety procedures.
Following Operation:

When disconnecting, stop the tractor or towing vehicle, set the brakes, lock the wings together
with the tie-bar (see Transformation Instructions), relieve hydraulic fluid pressure, shut off the
engine and
remove the ignition keys.
Make sure all jack and support stands are in place before
removing hitch pins.

Store the unit in an area away from human activity on a hard level surface.
 Do not park equipment where it will be exposed to livestock for long periods of time. Damage
and livestock injury could result.

Do not permit children to play on or around the stored unit.
Highway and Transport Operations:
 Make sure all transport lock provisions are in place and jack/parking stands are in their storage
position before transporting the unit. Also, lock the wings together with the tie-bar (see
Transformation Instructions).

Adopt safe driving practices:
–
Keep the brake pedals latched together at all times.
NEVER USE INDEPENDENT
BRAKING WITH MACHINE IN TOW AS LOSS OF CONTROL AND/OR UPSET
OF UNIT MAY RESULT.
– Always drive at a safe speed relative to local conditions and ensure that your speed is low
enough for an emergency stop to be safe and secure. Keep speed to a minimum.
– Reduce speed prior to turns to avoid the risk of overturning.
– Avoid sudden uphill turns on steep slopes.
– Always keep the tractor or towing vehicle in gear to provide engine braking when going
downhill. Do not coast.
– Do not drink and drive!
 Comply with state and local laws governing highway safety and movement of farm machinery on
public roads.

Use approved accessory lighting flags and necessary warning devices to protect operators of
other vehicles on the highway during daylight and nighttime transport. Various safety lights and
devices are available from your dealer.

The use of flashing amber lights is acceptable in most localities. However, some localities
prohibit their use. Local laws should be checked for all highway lighting and marking
requirements.
 When driving the tractor and equipment on the road or highway under 20 mph at night or driving
during the day, use flashing amber warning lights and a slow moving vehicle (SMV)
identification emblem.