McDATA 316095-B21 - StorageWorks Edge Switch 2/24, Manual

Page: 441 / 684

E
Groups in MIB II
E-9
MIB II
Description
The size of the largest datagram which can be sent/received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagrams, this is the size of the largest
network datagram that can be sent on the interface.
Sequence
::= { ifEntry 4 }
ifSpeed
Syntax
Gauge
Access
read-only
Status
mandatory
Description
An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain the
nominal bandwidth.
Sequence
::= { ifEntry 5 }
ifPhysAddress
Syntax
PhysAddress
Access
read-only
Status
mandatory
Description
The interface's address at the protocol layer immediately `below' the
network layer in the protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object should contain an octet
string of zero length.
Sequence
::= { ifEntry 6 }
ifAdminStatus
Syntax
INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode }
Access
read-write
Status
mandatory