2
Fibre Alliance MIB
2-123
McDATA SNMP Support
NOTE:
(for E/OS firmware): A reset or firmware load will cause this table to
be regenerated from the persistent login database – table indices will most
likely be associated with different entries after the reset.
*fcConnUnitLinkIndex
Type
Unsigned32
Product Mapping
A link index.
Access
R
Description
This value is used to create a unique value for each entry in the link
table with the same fcConnUnitId. The value can only be reused if it
is not currently in use and the value is the next candidate to be used.
This value is allowed to wrap at the highest value represented by the
number of bits. This value is reset to zero when the system is reset
and the first value to be used is 1.
FcConnUnitLinkNodeIdX
Type
OCTET STRING (SIZE(16))
Product Mapping
The WWN of the local fcConnUnit is returned. This information is
available for both E and F ports
Access
R
Description
The node WWN of the unit at one end of the link. If the node WWN is
unknown and the node is a fcConnUnit in the responding agent then
the value of this object MUST BE equal to its fcConnUnitId.
FcConnUnitLinkPortNumberX
Type
Integer32
Product Mapping
The fcConnUnit’s local port number is returned. This information is
available for both E and F ports.
Access
R
Description
The port number on the unit specified by fcConnUnitLinkNodeIdX if
known, otherwise –1. If the value is non-negative then it will be equal
to fcConnUnitPortPhysicalNumber.
Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24
