2
Fibre Alliance MIB
2-107
McDATA SNMP Support
FcConnUnitRevsRevision
Type
SnmpAdminString
Product Mapping
XX.XX.XX (The revision of the switch).
Access
R
Description
A vendor-specific value identifying a revision of a component of the
connectivity unit.
FcConnUnitRevsDescription
Type
SnmpAdminString
Product Mapping
Switch Firmware Level
Access
R
Description
Description of a component in the fcConnUnit to which the revision
corresponds.
Sensor Table
The sensor table lists the sensors (for fan and power supplies)
supported by each switch. For each switch, the table will contain a list
of all fan and power supply FRU positions, regardless of whether
they are installed or not. When a FRU is not installed, the
UnitSensorStatus for that table entry will be unknown(1). When a
power supply or fan FRU is installed or removed, a sensor trap will
be sent (if enabled) which contains an index to the appropriate entry
in this table, for the affected FRU.
Note that the number of entries in the table does not change when a
fan/power supply FRU is installed or removed.
*fcConnUnitSensorIndex
Type
Unsigned32
Product Mapping
Not assessable.
Access
R
Description
A unique value among all fcConnUnitSensorEntrys with the same
value of fcConnUnitId, in the range between 1 and
fcConnUnitNumSensors[fcConnUnitId].
Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24
